| 1. | Etching time has been extended in wet etching course 在电化学刻蚀过程中,需增加循环装置。 |
| 2. | Immersion wet etching system 浸渍式蚀刻系统 |
| 3. | Aluminium target with deep amplitude modulation fabricated by chemical wet etching process 调制靶的化学腐蚀制备工艺研究 |
| 4. | Wet etch processor 湿法腐蚀装置 |
| 5. | Wet etching system 湿式蚀刻系统 |
| 6. | We use wet etching and rie to fabricate the awg device with tir mirrors respectively 采用湿法腐蚀和干法刻蚀两种工艺分别制作出了全内反射型awg器件。 |
| 7. | For mentioned reasons above , considerable interests have been focused on laser induced wet etching 正因如此,激光腐蚀技术逐渐成为国内外学者研究的热点之一。 |
| 8. | Hf - based solution is widely used for cleaning and wet etching sio2 in pre - diffusion clean process 摘要以氟化氢为基础的溶液被广泛地用在扩散前清洗工艺中的二氧化矽清洗与蚀刻中。 |
| 9. | We discuss a low cost fabrication method of a diffractive microlens with high performance for both blue and red dvd objective lenses , which consists of single - step photolithography and a wet etching process 摘要采用单步光刻和湿法腐蚀工艺,低成本快速制作面向高性能蓝光和红光dvd光学头物镜的衍射微透镜。 |
| 10. | The lowest threshold current 1 . 8ma is achieved with continuous - wave at room temperature , the maximum output power is 7 . 96mw . for the resesrch work on the fabrication procedures , we discusses selective oxidation and selective wet etching 利用湿法氧化和选择性腐蚀相结合工艺研制出室温连续工作的vcsel ,最低阈值电流为1 . 8ma ,输出功率为7 . 96mw 。 |